(FOR-1005) Ford Ranger MX Series Upper Grille Installation Details

(FOR-1005) Ford Ranger MX Series Upper Grille

Products : FOR1005B , FOR1005S

Install Step #1:
Here is our Ford Ranger Custom Mesh grille kit Part# FOR1005 available in silver or black powder coated finishes.
Install Step #2:
Our Project Ford Ranger in need of a GrillCraft Custom front grille.
Install Step #3:
Remove the screws along the top side of the grille shell as shown.
Install Step #4:
The grille shell is attached along the bottom side with metal clips.
Install Step #5:
When removing the grille shell pull firmly forward near the bottom of the grille clips.
Install Step #6:
From the backside of the grille shell unclip and remove the center grille section.
Install Step #7:
From the backside of the grille shell unclip and remove the center grille section.
Install Step #8:
Place the new GrillCraft Mesh Sport Grille into the grille opening from the front side.
Install Step #9:
From the back side mark the mounting tab center hole locations.
Install Step #10:
Using a 3/16 drill bit drill for the mounting screws.
Install Step #11:
Insert the screws with the flat nut on the back side as shown.
Install Step #12:
Fasten the grille screws.
Install Step #13:
Wow our project Ford Ranger looks like a new truck!!!!!!!!!!
Install Step #14:
Ford Ranger Custom mesh grille installed looks awsome!!!
Install Step #15:
Ford Ranger Custom mesh grille installed looks awsome!!!

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2003 Ford Ranger XL N / A
2003 Ford Ranger XL N / A
2003 Ford Ranger XLT N / A
2003 Ford Ranger XLT N / A
2002 Ford Ranger EV N / A
2002 Ford Ranger EV N / A
2002 Ford Ranger XL N / A
2002 Ford Ranger XL N / A
2002 Ford Ranger XLT N / A
2002 Ford Ranger XLT N / A
2001 Ford Ranger EV N / A
2001 Ford Ranger EV N / A
2001 Ford Ranger XL N / A
2001 Ford Ranger XL N / A
2001 Ford Ranger XLT N / A
2001 Ford Ranger XLT N / A