(FOR-5022) Ford Mustang MX Series Upper Grille Installation Details

(FOR-5022) Ford Mustang MX Series Upper Grille

Products : FOR5022B , FOR5022S

Install Step #1:
Here is the upper GrillCraft MX-Series Mesh Grille kit for the 2005-2006 Mustang (GT Model) Part# FOR-5022 available in silver or black powder coat finish.
Install Step #2:
Our project Ford Mustang GT waiting for a GrillCraft custom mesh grille.
Install Step #3:
Remove plastic clips on the top panel that covers the grille.
Install Step #4:
Removing plastic upper panel.
Install Step #5:
Remove upper grille by releasing the plastic tabs shown.
Install Step #6:
Remove upper grille by releasing the plastic tabs shown.
Install Step #7:
Unclip the driving lamp plug.
Install Step #8:
Remove upper grille shell.
Install Step #9:
Option: Remove the clips on the back side of the pony emblem in most cases the prongs will break but its okay.
Install Step #10:
Removing pony emblem. The pony emblem can attached to the front side of the new grille using clear silicone.
Install Step #11:
The center section of the original grille must be cut out.
Install Step #12:
Removing the cut out plastic center section.
Install Step #13:
Removing the cut out plastic center section.
Install Step #14:
Here is the factory grille with the center section cut out.
Install Step #15:
Place the GrillCraft Mesh grille into the factory grille shell from the front side and mark mounting tab center holes.
Install Step #16:
Using a 3/16 drill bit drill for the mounting screws.
Install Step #17:
The supplied "U" nuts shown here.
Install Step #18:
Attach the supplied "U" nuts onto the mounting tab as shown.
Install Step #19:
fasten the GrillCraft Grille to the factory grille shell with the supplied screws.
Install Step #20:
Place the side grille pieces into the shell as shown and mark the mounting tab hole location then drill holes for mounting screws.
Install Step #21:
Attach the supplied "U" nuts onto the mounting tab as shown.
Install Step #22:
Fasten side grilles with supplied screws as shown.
Install Step #23:
Option: It is best to spray paint the area behind the grille with flat black paint this will give your vehicle a better appearance.
Install Step #24:
Shown here with the optional GrillCraft lower grille kit.
Install Step #25:
The fit of the GrillCraft MX-Series Mesh grille is awsome!!!!!!!!!
Install Step #26:
The fit of the GrillCraft MX-Series Mesh grille is awsome!!!!!!!!!
Install Step #27:
The fit of the GrillCraft MX-Series Mesh grille is awsome!!!!!!!!!
Install Step #28:
The fit of the GrillCraft MX-Series Mesh grille is awsome!!!!!!!!!
Install Step #29:
The fit of the GrillCraft MX-Series Mesh grille is awsome!!!!!!!!!
Install Step #30:
Looking good with GrillCraft!!!!!!!!!!

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2009 Ford Mustang GT Grille retains factory fog lamps.
2009 Ford Mustang GT Grille retains factory fog lamps.
2008 Ford Mustang GT Grille retains factory fog lamps.
2008 Ford Mustang GT Grille retains factory fog lamps.
2007 Ford Mustang GT Grille retains factory fog lamps.
2007 Ford Mustang GT Grille retains factory fog lamps.
2006 Ford Mustang GT Grille retains factory fog lamps.
2006 Ford Mustang GT Grille retains factory fog lamps.
2005 Ford Mustang GT Grille retains factory fog lamps.
2005 Ford Mustang GT Grille retains factory fog lamps.