(CHE-1506-SW) Chevy Pick-Up SW Series Upper Grille Installation Details

(CHE-1506-SW) Chevy Pick-Up SW Series Upper Grille

Products :

Install Step #1:
Here is our SW-Series Stainless Steel Woven Grille Kit Part# CHE-1506-SW
Install Step #2:
Our project vehicle waiting a grille make over.
Install Step #3:
Remove plastic clips that secure under hood cover.
Install Step #4:
Remove the top under hood cover.
Install Step #5:
Unfasten the clips that secure grille shell simply squeeze together and pull forward.
Install Step #6:
Unclip the grille shell end by pulling forward the clip will release.
Install Step #7:
Insert the GrillCraft Grille from the front side as shown and mark tab center holes.(Note Grille shown in this picture is our MX Series)
Install Step #8:
Mark mounting tab center holes.
Install Step #9:
Drill 3/16 inch holes for mounting screws.
Install Step #10:
Fasten grille with supplied hardware.
Install Step #11:
Tighten screws with 1/4 inch wrench.
Install Step #12:
Install grille shell to vehicle.
Install Step #13:
GrillCraft Custom Stainless Steel woven mesh grille.
Install Step #14:
GrillCraft Custom Stainless Steel woven mesh grille.
Install Step #15:
GrillCraft Custom Stainless Steel woven mesh grille.
Install Step #16:
GrillCraft Custom Stainless Steel woven mesh grille.
Install Step #17:
GrillCraft Custom Stainless Steel woven mesh grille.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes