(SUB-1713) Subaru Impreza MX Series Upper Grille Installation Details

(SUB-1713) Subaru Impreza MX Series Upper Grille

Products : SUB1713B , SUB1713S

Install Step #1:
Here is the Subaru WRX Upper Grille Kit Part# SUB-1713 available in silver or black finishes.
Install Step #2:
Here is our project project WRX in need of a GrillCraft Grille.
Install Step #3:
Start by pushing down on the upper grille fastners to release.
Install Step #4:
There are two fastners down below with a long screwdriver they can be released.
Install Step #5:
Remove original upper grille.
Install Step #6:
OPTIONAL: The center emblem can be blacked out or removed the option is yours.
Install Step #7:
Blacked out grille emblem shown.
Install Step #8:
Insert the GrillCraft grille into the original grille shell as shown.
Install Step #9:
Using a sharp scribe mark the mounting bracket center hole.
Install Step #10:
Using a 3/16 drill bit drill for mounting screws.
Install Step #11:
Install "U" nuts onto mounting tabs.
Install Step #12:
Fasten mounting screw from the backside as shown.
Install Step #13:
Our project vehicle shown with upper grille installed.
Install Step #14:
Our project Subaru Wrx shown with upper & lower custom mesh grille installed.
Install Step #15:
Our project Subaru Wrx shown with upper & lower custom mesh grille installed. Shown here in black!!!!

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2003 Subaru Impreza WRX N / A
2003 Subaru Impreza WRX N / A
2003 Subaru Impreza WRX N / A
2003 Subaru Impreza WRX N / A
2002 Subaru Impreza WRX N / A
2002 Subaru Impreza WRX N / A
2002 Subaru Impreza WRX N / A
2002 Subaru Impreza WRX N / A