(TOY-1871/73) Scion TC MX Series Lower Grille Installation Details

(TOY-1871/73) Scion TC MX Series Lower Grille

Products : TOY1871B , TOY1871S , TOY1873B , TOY1873S

Install Step #1:
Here is the GrillCraft MX Series Lower mesh grille kit 3pc for the Scion TC Part# TOY-1873 or Part# TOY-1871 1pc Lower center only available in silver and black powder coated finishes.
Install Step #2:
Our project Scion TC in need of a GrillCraft custom grille.
Install Step #3:
Open the hood and remove the plastic clips as shown.
Install Step #4:
Remove the rubber stop as shown.
Install Step #5:
Remove the plastic clip using a screw driver.
Install Step #6:
Remove the 10mm bolt in the fender well area.
Install Step #7:
Peel the front section of the splash shield back as shown.
Install Step #8:
Remove the screw that are located behind the splash shield.
Install Step #9:
Remove the bolt located on the under side of the bumper lower corners.
Install Step #10:
Remove the bolts located on the under side of bumper front section.
Install Step #11:
Pull bumper cover forward and it will come off the vehicle.
Install Step #12:
Place the lower grille in from the front side of the opening. Hold firmly in place against stock plastic grille insert and mark mounting tab center holes.
Install Step #13:
Drill 3/16 holes for the mounting screws.
Install Step #14:
Remove factory plastic grille insert. This will no longer be needed.
Install Step #15:
Place lower grille into opening once again.
Install Step #16:
Attach lower grille with supplied hardware.
Install Step #17:
Note: "Flat" nut on the backside of the bumper.
Install Step #18:
Next lets install the OPTIONAL: side vent griles. Remove plastic side vent inserts.
Install Step #19:
Place vent grille into opening and mark the side pin location.
Install Step #20:
Drill 3/16 hole for side pin.
Install Step #21:
Mount side vent in opening and mark mount tab center hole location.
Install Step #22:
Drill 3/16 hole for mounting screw.
Install Step #23:
Place mounting screw into the tab as shown.
Install Step #24:
Place vent grille in place and fasten.
Install Step #25:
Fasten side vent grille in place.
Install Step #26:
Fits like a glove!!!!!!
Install Step #27:
Looking good with Grillcraft
Install Step #28:
Wow what a difference the new Grillcraft custom grille makes. Shown here with optional upper grille kit.
Install Step #29:
Our project Scion TC looking good!!!!!!!!!
Install Step #30:
GrillCraft Scion Custom Grilles
Install Step #31:
The GrillCraft grille will fit vehicles with factory foglamps & ground effects kits as well.
Install Step #32:
Install Step #33:
Install Step #34:
Install Step #35:
Install Step #36:
Install Step #37:
Install Step #38:
The GrillCraft grilles will still fit Scion TC equipped with factory foglamps & ground effects kit.
Install Step #39:
The GrillCraft grilles will still fit Scion TC equipped with factory foglamps & ground effects kit.
Install Step #40:
The GrillCraft grilles will still fit Scion TC equipped with factory foglamps & ground effects kit.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2010 Scion tC Base N / A
2010 Scion tC Base N / A
2010 Scion tC Base N / A
2010 Scion tC Base N / A
2009 Scion tC Base N / A
2009 Scion tC Base N / A
2009 Scion tC Base N / A
2009 Scion tC Base N / A
2008 Scion tC Base N / A
2008 Scion tC Base N / A
2008 Scion tC Base N / A
2008 Scion tC Base N / A
2007 Scion tC Base N / A
2007 Scion tC Base N / A
2007 Scion tC Base N / A
2007 Scion tC Base N / A
2006 Scion tC Base N / A
2006 Scion tC Base N / A
2006 Scion tC Base N / A
2006 Scion tC Base N / A
2005 Scion tC Base N / A
2005 Scion tC Base N / A
2005 Scion tC Base N / A
2005 Scion tC Base N / A