(DOD-1010-BAO) Dodge Ram BG Series Upper Grille Installation Details

(DOD-1010-BAO) Dodge Ram BG Series Upper Grille

Products : DOD1010-BAO

Install Step #1:
Here's our Project 2010 Dodge Ram 2500 in need of a GrillCraft Billet Grille.
Install Step #2:
Start by removing the upper radiator cover; using a flat blade screwdriver remove the four clips holding it in place. You may opt to cut them with a cutter as replacement clips are included.
Install Step #3:
Once all four clips are removed, the cover comes right off.
Install Step #4:
Use a 10mm socket & ratchet to remove the four screws securing the upper half of the grille shell.
Install Step #5:
With the upper half of the grille shell loose, pull the bottom half of the grille shell out to unclip it from the vehicle.
Install Step #6:
Follow Steps 7 through 11 for Bolt-Over Installation. Follow Steps 12 through 19 for Cut-Out Installation.
Install Step #7:
Place the new billet inserts into their respective openings.
Install Step #8:
Locate the included hardware.
Install Step #9:
Place a screw the the front of the billet grille and on the backside attach a bracket and secure with a locknut.
Install Step #10:
Once tight, the assembly should be secure from the back as shown.
Install Step #11:
Reinstall the grille shell onto the vehicle and installation is complete! Our Dodge Ram 2500 shown here with a GrillCraft BG Series Billet Grille.
Install Step #12:
Place the new billet inserts into their respective openings.
Install Step #13:
Using a sharp scribe tool, mark the locations of the mounting holes onto the grille shell.
Install Step #14:
Using a 3/16" drill bit, drill the necessary mounting holes.
Install Step #15:
Using a cutting tool, cut the black inner ribs in the openings of the grille shell.
Install Step #16:
Once cut, they will remove from the grille shell as pictured.
Install Step #17:
Locate the included hardware.
Install Step #18:
Place the billet grilles into the openings and install with the included hardware as shown.
Install Step #19:
Reinstall the grille shell onto the vehicle and installation is complete! Our Dodge Ram 2500 shown here with a GrillCraft BG Series Billet Grille.
Install Step #20:
Our Dodge Ram 2500 shown here with a GrillCraft BG Series Billet Grille.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2010 Dodge Ram 2500 Laramie N / A
2010 Dodge Ram 2500 Power Wagon N / A
2010 Dodge Ram 2500 SLT N / A
2010 Dodge Ram 2500 ST N / A
2010 Dodge Ram 2500 SXT N / A
2010 Dodge Ram 3500 Laramie N / A
2010 Dodge Ram 3500 SLT N / A
2010 Dodge Ram 3500 ST N / A
2010 Dodge Ram 3500 SXT N / A
2012 Ram 2500 Laramie N / A
2012 Ram 2500 Laramie Longhorn N / A
2012 Ram 2500 Outdoorsman N / A
2012 Ram 2500 Power Wagon N / A
2012 Ram 2500 SLT N / A
2012 Ram 2500 ST N / A
2012 Ram 3500 Laramie N / A
2012 Ram 3500 Laramie Longhorn N / A
2012 Ram 3500 SLT N / A
2012 Ram 3500 ST N / A
2011 Ram 2500 Laramie N / A
2011 Ram 2500 Laramie Longhorn N / A
2011 Ram 2500 Power Wagon N / A
2011 Ram 2500 SLT N / A
2011 Ram 2500 ST N / A
2011 Ram 3500 Laramie N / A
2011 Ram 3500 Laramie Longhorn N / A
2011 Ram 3500 SLT N / A
2011 Ram 3500 ST N / A