(FOR-5032-BAO) Ford Mustang BG Series Upper Grille Installation Details

(FOR-5032-BAO) Ford Mustang BG Series Upper Grille

Products : FOR5032-BAO

Install Step #1:
Our project Ford Mustang GT waiting for a GrillCraft BG-Series Billet Grille.
Install Step #2:
The install will require working through the back of the grille shell, so access under the hood will be necessary.
Install Step #3:
Using a Flat-Head Screwdriver, remove the clips holding the Plastic Radiator Cover to the vehicle.
Install Step #4:
Once all clips are removed, the cover will come right off.
Install Step #5:
Here's a view of the Plastic Radiator Cover you've just removed.
Install Step #6:
The Drivers-side Billet Insert utilized a spring loaded clamp to hold the grille to the vehicle. The assembly attaches as pictured.
Install Step #7:
With the spring loaded bracket attached in the very first threads of the screw, push the bracket through the center Honeycomb opening to attach.
Install Step #8:
Once attached, tighten the Billet Insert to the grille shell using a Phillips Screwdriver.
Install Step #9:
The Passenger-side Insert does not utilize a clamp, but simply screws into the grille shell.
Install Step #10:
The insert will install as shown, be sure to fasten the included screw perpendicular to the grille shell for best attachment.
Install Step #11:
Tighten the Billet insert until firmly attached to the Grille Shell.
Install Step #12:
The pictured hardware will be used for attaching the Center Billet Insert.
Install Step #13:
The U-Clips will need to be attached to the brackets so that the assembly can be attached to the vehicle as shown.
Install Step #14:
Before you install the Insert, you'll need to remove the Pony Emblem from the Grille Shell.
Install Step #15:
The clips Ford utilized are one time use, so you'll need to snap them off from the back of the grille shell using a pair of pliers or cutters.
Install Step #16:
With the emblem removed, the grille shell should look like so. Note the location of the clips for the pony emblem.
Install Step #17:
Place the Billet Insert onto the Vehicle and attach with the hardware previously shown. Be sure not to over tighten.
Install Step #18:
With the Install Completed, you'll have your own GrillCraft Billet BG Series Upper Mustang GT Grille.
Install Step #19:
Our project Mustang GT shown here with GrillCraft BG Series Upper & Lower Billet grille inserts installed. Shown with Optional GrillCraft Lower Piece Billet Grilles.
Install Step #20:
Our project Mustang GT shown here with GrillCraft BG Series Upper & Lower Billet grille inserts installed. Shown with Optional GrillCraft Lower Piece Billet Grilles.
Install Step #21:
Our project Mustang GT shown here with GrillCraft BG Series Upper & Lower Billet grille inserts installed. Shown with Optional GrillCraft Lower Piece Billet Grilles.
Install Step #22:
Our project Mustang GT shown here with GrillCraft BG Series Upper & Lower Billet grille inserts installed. Shown with Optional GrillCraft Lower Piece Billet Grilles.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2014 Ford Mustang GT N / A
2013 Ford Mustang GT N / A