(TOY-1966-BAC) Toyota Tundra BG Series Upper Grille Installation Details

(TOY-1966-BAC) Toyota Tundra BG Series Upper Grille

Products : TOY1966-BAC

Install Step #1:
Our project 2010/12 Toyota Tundra in need of a custom GrillCraft Grille.
Install Step #2:
Open the hood and remove the (10) 10mm bolts holding the grill shell to the hood. The grill will still be held in with clips near its top(clips pop out with a gentle pull).
Install Step #3:
Remove the (2) 10mm bolts holding the hood latch assembly to the grille.
Install Step #4:
To install your TOY-1966-BAC Grille, you need to cut out the inner portion of your grill.
Install Step #5:
Taking a close look at the edges, the inner portion has been cut and sanded smooth to the surround.
Install Step #6:
Taking a close look at the edges, the inner portion has been cut and sanded smooth to the surround.
Install Step #7:
With the center portion of the grill cut out, place the billet grille into the grill shell opening.
Install Step #8:
Adjust the face of the billet grill flush with the grille shell, or at desired depth and mark the holes through the tabs on the grille with a scribe. You'll need to drill holes at those locations to mount the grille.
Install Step #9:
Drill a 3/16" hole using a drill bit at the marked locations on the grill shell.
Install Step #10:
Locate all the included hardware.
Install Step #11:
With the billet grille placed back into the grille shell, use a supplied screw and flat nut to mount the billet grill to the shell.
Install Step #12:
With the grille mounted fully to the grille shell, your grill should look like this.
Install Step #13:
Attach the two included U-nuts onto your billet grille where the hood latch will mount to.
Install Step #14:
Remove the hood-latch bracket off of the old grille insert cut out previously by unscrewing the (2) Phillip head screws and attach it to the new billet grille.
Install Step #15:
Reattach your grill onto your truck clipping it in on the top and bolting it with the previously removed 10mm bolts. They attach the hood latch as shown.
Install Step #16:
Our project 2010/12 Toyota Tundra shown here with GrillCraft BG Series upper & lower billet grille inserts installed. Shown with Optional GrillCraft Lower 3 Piece Billet Grilles.
Install Step #17:
Our project 2010/12 Toyota Tundra shown here with GrillCraft BG Series upper & lower billet grille inserts installed. Shown with Optional GrillCraft Lower 3 Piece Billet Grilles.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2013 Toyota Tundra Base N / A
2013 Toyota Tundra Limited N / A
2013 Toyota Tundra Platinum N / A
2012 Toyota Tundra Base N / A
2012 Toyota Tundra Limited N / A
2011 Toyota Tundra Base N / A
2011 Toyota Tundra Limited N / A
2011 Toyota Tundra SR5 N / A
2010 Toyota Tundra Base N / A
2010 Toyota Tundra Limited N / A
2010 Toyota Tundra SR5 N / A