(CHE-1519-BAC) Chevy Silverado BG Series Lower Insert (Mid Section) Grille Installation Details

(CHE-1519-BAC) Chevy Silverado BG Series Lower Insert (Mid Section) Grille

Products : CHE1519-BAC

Install Step #1:
Our project Chevy Silverado in need of a GrillCraft Grill.
Install Step #2:
To Install the Middle Bumper Grill, take off your trucks grill shell by removing the 10mm nuts holding it to the trucks core support.
Install Step #3:
You'll then need to pinch the clips on the back of the grill to release it from the support. TIP: Move from outside to inside when releasing the clips and keep positive tension on the grill as you're removing the grill so it does not clip itself back in because of its tension.
Install Step #4:
With the grill shell removed, this is what your truck should look like.
Install Step #5:
Locate all of the included hardware to install the Billet Grill.
Install Step #6:
Attach the U-Clips to the included "L" Brackets as shown.
Install Step #7:
Remove the Outer Clips in the middle bumper opening on the left and right. You'll use this hole to mount the bracket for the billet grill.
Install Step #8:
Place the "L" Bracket in the opening standing up and drop in one of the supplied bolts.
Install Step #9:
Use a supplied nut and washer and screw the "L" Bracket in place. You'll can access the bottom of the bolt from the top under the factory rubber sheeting. Using a wrench and ratchet, tighten them to the bumper.
Install Step #10:
Notice both "L" Brackets are in facing toward the front of the vehicle.
Install Step #11:
Slide in the billet grill to the brackets and using a supplied screw, screw the grill into the bracket. Repeat on other side of grill.
Install Step #12:
Re-install the grill by clipping it back into place and attach all bolts on top of the grill.
Install Step #13:
Our 2007-2010 Chevy Silverado 2500-3500 looking good with a GrillCraft BG-Series Custom Grill. Shown here with an Upper and Lower Billet Grill.
Install Step #14:
Our 2007-2010 Chevy Silverado 2500-3500 looking good with a GrillCraft BG-Series Custom Grill. Shown here with an Upper and Lower Billet Grill.
Install Step #15:
Our 2007-2010 Chevy Silverado 2500-3500 looking good with a GrillCraft BG-Series Custom Grill. Shown here with an Upper and Lower Billet Grill.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2010 Chevrolet Silverado 2500 HD LT N / A
2010 Chevrolet Silverado 2500 HD LTZ N / A
2010 Chevrolet Silverado 2500 HD WT N / A
2010 Chevrolet Silverado 3500 HD LT N / A
2010 Chevrolet Silverado 3500 HD LTZ N / A
2010 Chevrolet Silverado 3500 HD WT N / A
2009 Chevrolet Silverado 2500 HD LT N / A
2009 Chevrolet Silverado 2500 HD LTZ N / A
2009 Chevrolet Silverado 2500 HD WT N / A
2009 Chevrolet Silverado 3500 HD LT N / A
2009 Chevrolet Silverado 3500 HD LTZ N / A
2009 Chevrolet Silverado 3500 HD WT N / A
2008 Chevrolet Silverado 2500 HD LT N / A
2008 Chevrolet Silverado 2500 HD LTZ N / A
2008 Chevrolet Silverado 2500 HD WT N / A
2008 Chevrolet Silverado 3500 HD LT N / A
2008 Chevrolet Silverado 3500 HD LTZ N / A
2008 Chevrolet Silverado 3500 HD WT N / A
2007 Chevrolet Silverado 2500 HD LT N / A
2007 Chevrolet Silverado 2500 HD LTZ N / A
2007 Chevrolet Silverado 2500 HD WT N / A
2007 Chevrolet Silverado 3500 HD LT N / A
2007 Chevrolet Silverado 3500 HD LTZ N / A
2007 Chevrolet Silverado 3500 HD WT N / A