(CHE-1511-BAO) Chevy Silverado BG Series Upper Grille Installation Details

(CHE-1511-BAO) Chevy Silverado BG Series Upper Grille

Products : CHE1511-BAO

Install Step #1:
Our project Chevy Silverado in need of a GrillCraft Grill.
Install Step #2:
The upper plastic trim panel above the grille will need to be removed.
Install Step #3:
Locate and remove all plastic fasteners holding the upper plastic trim.
Install Step #4:
Remove the plastic fastners along the top of the plastic cover panel as shown, prying a flat screw driver underneath the plastic fastener and pushing up to release it.
Install Step #5:
Now the upper trim panel can be removed from the vehicle.
Install Step #6:
With the trim panel removed, this is what your truck should look like underneath.
Install Step #7:
Locate all necessary hardware to install the Billet Grill.
Install Step #8:
Install all U-Nuts on the included brackets as shown.
Install Step #9:
The Lower Grill will be bolted with the included angle bracket as shown.
Install Step #10:
Place the lower grille insert into the grille shell opening.
Install Step #11:
With the bracket previously show, place the bracket behind the grill shell and using the included Phillip screws, screw the grill into the bracket using the outer-top mounting hole. Repeat on other side of grill.
Install Step #12:
Using another Phillip screw, screw the grill into the bracket using the outer-bottom mounting hole. Repeat on other side of grill.
Install Step #13:
The inner mounting points on the grill will use the Flat brackets.
Install Step #14:
Using a Phillip screw, tighten the bracket to the grill. Be careful not to over tighten the screws. Repeat on other side of grill.
Install Step #15:
Place the Upper grill into the grill opening as pictured.
Install Step #16:
The outer sides of the Upper Billet grill will use the bracket shown.
Install Step #17:
The bracket will be screwed in Horizontally from behind the grill.
Install Step #18:
Screw in the bracket using an included Phillip screw. Be sure not to over tighten.
Install Step #19:
Use the short brackets for the center of the grill. They will be bolted in Vertically to the back of the grill.
Install Step #20:
Screw the bracket using a Phillip screw, take note that the bracket behind is placed Vertically.
Install Step #21:
Re-install the upper plastic trim and all plastic fasteners.
Install Step #22:
Our 2007-2010 Chevy Silverado 2500-3500 looking good with a GrillCraft BG-Series Custom Grill.
Install Step #23:
Our 2007-2010 Chevy Silverado 2500-3500 looking good with a GrillCraft BG-Series Custom Grill.
Install Step #24:
Our 2007-2010 Chevy Silverado 2500-3500 looking good with a GrillCraft BG-Series Custom Grill. Shown here with an Upper and Lower Billet Grill.
Install Step #25:
Our 2007-2010 Chevy Silverado 2500-3500 looking good with a GrillCraft BG-Series Custom Grill. Shown here with an Upper and Lower Billet Grill.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2010 Chevrolet Silverado 2500 HD LT N / A
2010 Chevrolet Silverado 2500 HD LTZ N / A
2010 Chevrolet Silverado 2500 HD WT N / A
2010 Chevrolet Silverado 3500 HD LT N / A
2010 Chevrolet Silverado 3500 HD LTZ N / A
2010 Chevrolet Silverado 3500 HD WT N / A
2009 Chevrolet Silverado 2500 HD LT N / A
2009 Chevrolet Silverado 2500 HD LTZ N / A
2009 Chevrolet Silverado 2500 HD WT N / A
2009 Chevrolet Silverado 3500 HD LT N / A
2009 Chevrolet Silverado 3500 HD LTZ N / A
2009 Chevrolet Silverado 3500 HD WT N / A
2008 Chevrolet Silverado 2500 HD LT N / A
2008 Chevrolet Silverado 2500 HD LTZ N / A
2008 Chevrolet Silverado 2500 HD WT N / A
2008 Chevrolet Silverado 3500 HD LT N / A
2008 Chevrolet Silverado 3500 HD LTZ N / A
2008 Chevrolet Silverado 3500 HD WT N / A
2007 Chevrolet Silverado 2500 HD LT N / A
2007 Chevrolet Silverado 2500 HD LTZ N / A
2007 Chevrolet Silverado 2500 HD WT N / A
2007 Chevrolet Silverado 3500 HD LT N / A
2007 Chevrolet Silverado 3500 HD LTZ N / A
2007 Chevrolet Silverado 3500 HD WT N / A