(TOY-1856) Scion XB MX Series Lower Grille Installation Details

(TOY-1856) Scion XB MX Series Lower Grille

Products : TOY1856B , TOY1856S

Install Step #1:
Here is our project Scion XB in need of a GrillCraft Custom MX-Series Lower Mesh 3pc Grille kit.
Install Step #2:
Remove the plastic clips that secure the plastic upper trim panel. Press down on clip center in order to release clip.
Install Step #3:
Remove the plastic clips that secure the plastic upper trim as shown.
Install Step #4:
Removing plastic upper grille trim cover.
Install Step #5:
Remove upper grille shell bolts.
Install Step #6:
Remove upper grille shell plastic clips.
Install Step #7:
Remove bolt located on right & left top section of the bumper cover as shown.
Install Step #8:
Remove plastic clips located on right & left top section of bumper cover.
Install Step #9:
Remove the bolt in the front section of the right & left fender well as shown.
Install Step #10:
Remove clip located in the front section of the fender well.
Install Step #11:
Remove clips along the front underside of bumper cover.
Install Step #12:
Remove bumper cover from vehicle.
Install Step #13:
Remove factory lower grille from bumper cover.
Install Step #14:
Install GrillCraft lower grille into lower bumper opening from the front side.
Install Step #15:
While holding grille in place mark mounting bracket center hole locations.
Install Step #16:
Drill mounting screw holes using a 3/16 drill bit.
Install Step #17:
Install grille with supplied hardware.
Install Step #18:
Fasten grille grille screws.
Install Step #19:
OPTIONAL: We recommend painting the area behind the grille using flat black spray paint.
Install Step #20:
OPTIONAL: We recommend painting the area behind the grille using flat black spray paint.
Install Step #21:
OPTIONAL: We recommend painting the area behind the grille using flat black spray paint.
Install Step #22:
Shown here GrillCraft side vent grilles. Note threaded mounting studs.
Install Step #23:
Mark location of vent grille mounting studs onto bumper vent area.
Install Step #24:
Drill vent grille mounting holes using a 1/4 inch drill bit.
Install Step #25:
Place vent grilles into bumper vent opening.
Install Step #26:
The vent grille mounting hardware. Fasten vent grille lock nut from the back side.
Install Step #27:
Project Scion XB with GrillCraft MX Series custom mesh grille installed. Shown here with optinal upper grille kit.
Install Step #28:
Project Scion XB with GrillCraft MX Series custom mesh grille installed. Shown here with optinal upper grille kit.
Install Step #29:
Project Scion XB with GrillCraft MX Series custom mesh grille installed. Shown here with optinal upper grille kit.
Install Step #30:
Project Scion XB with GrillCraft MX Series custom mesh grille installed. Shown here with optinal upper grille kit.
Install Step #31:
Project Scion XB with GrillCraft MX Series custom mesh grille installed. Shown here with optinal upper grille kit.
Install Step #32:
Project Scion XB with GrillCraft MX Series custom mesh grille installed. Shown here with optinal upper grille kit.
Install Step #33:
Project Scion XB with GrillCraft MX Series custom mesh grille installed. Shown here with optinal upper grille kit.
Install Step #34:
Project Scion XB with GrillCraft MX Series custom mesh grille installed. Shown here with optinal upper grille kit.
Install Step #35:
Project Scion XB with GrillCraft MX Series custom mesh grille installed. Shown here with optinal upper grille kit.
Install Step #36:
Project Scion XB with GrillCraft MX Series custom mesh grille installed. Shown here with optinal upper grille kit.
Install Step #37:

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2015 Scion xB Base N / A
2015 Scion xB Base N / A
2014 Scion xB Base N / A
2014 Scion xB Base N / A
2013 Scion xB Base N / A
2013 Scion xB Base N / A
2012 Scion xB Base N / A
2012 Scion xB Base N / A
2011 Scion xB Base N / A
2011 Scion xB Base N / A