(CHE-1515-BAO) Chevy Silverado BG Series Lower Grille Kit Installation Details

(CHE-1515-BAO) Chevy Silverado BG Series Lower Grille Kit

Products : CHE1515-BAO

Install Step #1:
Our project Chevy Silverado in need of a GrillCraft Grill.
Install Step #2:
Locate the Front Tow Hooks mounted on both the left and right side of the lower portion of the Front Bumper. They will both need to be removed in order to install the Lower Grill.
Install Step #3:
To remove the Tow Hook, you'll need to unscrew the upper bolt holding the tow hook.
Install Step #4:
Next remove the Lower Bolt to the tow hook. I helps to keep the Upper Bolt (nut removed) in while removing the lower bolt.
Install Step #5:
Remove both Upper and Lower bolts completely. Note there are only 2 Bolts holding the Tow Hook.
Install Step #6:
The Tow Hook will slide out through the Front of the truck. Once removed, repeat steps 2-6 on the other Tow Hook.
Install Step #7:
The removed Tow Hook will look like so. Be sure to thread in the bolts into the removed tow hook so you do not lose them.
Install Step #8:
Screw on two bolts with a washer in between onto the included threaded rods. This will aid in tightening the rods onto the grill.
Install Step #9:
Using an appropriate wrench and ratchet, tighten the bolts securely onto each other. Be sure not to over-tighten.
Install Step #10:
Thread in the rods into the grill.
Install Step #11:
Tighten them down securely using a ratchet. Thread-locker may be used on the rod for added security.
Install Step #12:
Un-tighten the nuts using a wrench and ratchet, and remove them from the threaded rod. Be sure not to loosen the threaded rod from the grill when removing the nuts.
Install Step #13:
Repeat on the 3 remaining threaded rods.
Install Step #14:
Line up the Lower Grill into its' opening and mark the 4 positions of the threaded rod. These 4 marks will need to be drilled using a 1/4 inch drill-bit to securely fasten the lower grill.
Install Step #15:
Once all 4 holes have been drilled, place the lower grill into the opening.
Install Step #16:
On the back side of the lower valence, place the included bracket through the threaded rod, and screw on a nut behind it. Tighten the nut securely to attach the lower grill to the valence.
Install Step #17:
Our 2007-2010 Chevy Silverado 2500-3500 looking good with a GrillCraft BG-Series Custom Grill. Shown here with an Upper and Lower Billet Grill.
Install Step #18:
Our 2007-2010 Chevy Silverado 2500-3500 looking good with a GrillCraft BG-Series Custom Grill. Shown here with an Upper and Lower Billet Grill.
Install Step #19:
Our 2007-2010 Chevy Silverado 2500-3500 looking good with a GrillCraft BG-Series Custom Grill. Shown here with an Upper and Lower Billet Grill.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2013 Chevrolet Silverado 1500 Hybrid Fits Standard Factory Grain Finish Plastic Valance.
2013 Chevrolet Silverado 1500 LS Fits Standard Factory Grain Finish Plastic Valance.
2013 Chevrolet Silverado 1500 LT Fits Standard Factory Grain Finish Plastic Valance.
2013 Chevrolet Silverado 1500 LTZ Fits Standard Factory Grain Finish Plastic Valance.
2013 Chevrolet Silverado 1500 WT Fits Standard Factory Grain Finish Plastic Valance.
2013 Chevrolet Silverado 1500 XFE Fits Standard Factory Grain Finish Plastic Valance.
2012 Chevrolet Silverado 1500 Hybrid Fits Standard Factory Grain Finish Plastic Valance.
2012 Chevrolet Silverado 1500 LS Fits Standard Factory Grain Finish Plastic Valance.
2012 Chevrolet Silverado 1500 LT Fits Standard Factory Grain Finish Plastic Valance.
2012 Chevrolet Silverado 1500 LTZ Fits Standard Factory Grain Finish Plastic Valance.
2012 Chevrolet Silverado 1500 WT Fits Standard Factory Grain Finish Plastic Valance.
2012 Chevrolet Silverado 1500 XFE Fits Standard Factory Grain Finish Plastic Valance.
2011 Chevrolet Silverado 1500 Hybrid Fits Standard Factory Grain Finish Plastic Valance.
2011 Chevrolet Silverado 1500 LS Fits Standard Factory Grain Finish Plastic Valance.
2011 Chevrolet Silverado 1500 LT Fits Standard Factory Grain Finish Plastic Valance.
2011 Chevrolet Silverado 1500 LTZ Fits Standard Factory Grain Finish Plastic Valance.
2011 Chevrolet Silverado 1500 WT Fits Standard Factory Grain Finish Plastic Valance.
2011 Chevrolet Silverado 1500 XFE Fits Standard Factory Grain Finish Plastic Valance.
2010 Chevrolet Silverado 1500 Hybrid Fits Standard Factory Grain Finish Plastic Valance.
2010 Chevrolet Silverado 1500 LS Fits Standard Factory Grain Finish Plastic Valance.
2010 Chevrolet Silverado 1500 LT Fits Standard Factory Grain Finish Plastic Valance.
2010 Chevrolet Silverado 1500 LTZ Fits Standard Factory Grain Finish Plastic Valance.
2010 Chevrolet Silverado 1500 WT Fits Standard Factory Grain Finish Plastic Valance.
2010 Chevrolet Silverado 1500 XFE Fits Standard Factory Grain Finish Plastic Valance.
2010 Chevrolet Silverado 2500 HD LT Fits Standard Factory Grain Finish Plastic Valance.
2010 Chevrolet Silverado 2500 HD LTZ Fits Standard Factory Grain Finish Plastic Valance.
2010 Chevrolet Silverado 2500 HD WT Fits Standard Factory Grain Finish Plastic Valance.
2010 Chevrolet Silverado 3500 HD LT Fits Standard Factory Grain Finish Plastic Valance.
2010 Chevrolet Silverado 3500 HD LTZ Fits Standard Factory Grain Finish Plastic Valance.
2010 Chevrolet Silverado 3500 HD WT Fits Standard Factory Grain Finish Plastic Valance.
2009 Chevrolet Silverado 1500 Hybrid Fits Standard Factory Grain Finish Plastic Valance.
2009 Chevrolet Silverado 1500 LS Fits Standard Factory Grain Finish Plastic Valance.
2009 Chevrolet Silverado 1500 LT Fits Standard Factory Grain Finish Plastic Valance.
2009 Chevrolet Silverado 1500 LTZ Fits Standard Factory Grain Finish Plastic Valance.
2009 Chevrolet Silverado 1500 WT Fits Standard Factory Grain Finish Plastic Valance.
2009 Chevrolet Silverado 2500 HD LT Fits Standard Factory Grain Finish Plastic Valance.
2009 Chevrolet Silverado 2500 HD LTZ Fits Standard Factory Grain Finish Plastic Valance.
2009 Chevrolet Silverado 2500 HD WT Fits Standard Factory Grain Finish Plastic Valance.
2009 Chevrolet Silverado 3500 HD LT Fits Standard Factory Grain Finish Plastic Valance.
2009 Chevrolet Silverado 3500 HD LTZ Fits Standard Factory Grain Finish Plastic Valance.
2009 Chevrolet Silverado 3500 HD WT Fits Standard Factory Grain Finish Plastic Valance.
2008 Chevrolet Silverado 1500 LS Fits Standard Factory Grain Finish Plastic Valance.
2008 Chevrolet Silverado 1500 LT Fits Standard Factory Grain Finish Plastic Valance.
2008 Chevrolet Silverado 1500 LTZ Fits Standard Factory Grain Finish Plastic Valance.
2008 Chevrolet Silverado 1500 WT Fits Standard Factory Grain Finish Plastic Valance.
2008 Chevrolet Silverado 2500 HD LT Fits Standard Factory Grain Finish Plastic Valance.
2008 Chevrolet Silverado 2500 HD LTZ Fits Standard Factory Grain Finish Plastic Valance.
2008 Chevrolet Silverado 2500 HD WT Fits Standard Factory Grain Finish Plastic Valance.
2008 Chevrolet Silverado 3500 HD LT Fits Standard Factory Grain Finish Plastic Valance.
2008 Chevrolet Silverado 3500 HD LTZ Fits Standard Factory Grain Finish Plastic Valance.
2008 Chevrolet Silverado 3500 HD WT Fits Standard Factory Grain Finish Plastic Valance.
2007 Chevrolet Silverado 1500 LS Will not fit Z71 Appearance package body colored valance.
2007 Chevrolet Silverado 1500 LT Fits Standard Factory Grain Finish Plastic Valance.
2007 Chevrolet Silverado 1500 LTZ Fits Standard Factory Grain Finish Plastic Valance.
2007 Chevrolet Silverado 1500 WT Fits Standard Factory Grain Finish Plastic Valance.
2007 Chevrolet Silverado 2500 HD LT Fits Standard Factory Grain Finish Plastic Valance.
2007 Chevrolet Silverado 2500 HD LTZ Fits Standard Factory Grain Finish Plastic Valance.
2007 Chevrolet Silverado 2500 HD WT Fits Standard Factory Grain Finish Plastic Valance.
2007 Chevrolet Silverado 3500 HD LT Fits Standard Factory Grain Finish Plastic Valance.
2007 Chevrolet Silverado 3500 HD LTZ Fits Standard Factory Grain Finish Plastic Valance.
2007 Chevrolet Silverado 3500 HD WT Fits Standard Factory Grain Finish Plastic Valance.