(TOY-1821) Toyota Prius MX Series Lower Grille Installation Details

(TOY-1821) Toyota Prius MX Series Lower Grille

Products : TOY1821B , TOY1821S

Install Step #1:
Our project Toyota Prius in need of a GrillCraft MX-Series lower mesh grille kit.
Install Step #2:
Open the front hood.
Install Step #3:
Remove the plastic clips that secure the plastic under hood trim panel.
Install Step #4:
Remove plastic trim panel.
Install Step #5:
Remove the bolts that secure the top section of the bumper cover to the vehicle.
Install Step #6:
Remove the plastic clips along the top side of the bumper cover.
Install Step #7:
Remove the screw located in the front fender well there is one screw on each side.
Install Step #8:
Remove the plastic clip located in the front fender well there is one on each side.
Install Step #9:
Remove the plastic push clips and bolts located on the front underside of the bumper cover.
Install Step #10:
Pull the top portion of the bumper cover forward in order to unclip from vehicle.
Install Step #11:
Pull the right & left side of the bumper cover in order to unclip cover from vehicle.
Install Step #12:
Now remove bumper cover from vehicle.
Install Step #13:
Place the GrillCraft lower grille insert into the lower bumper grille openings as shown.
Install Step #14:
While holding insert in place mark mounting tab center hole location using a sharp scribe.
Install Step #15:
Using 3/16 drill bit drill holes for the mounting screws.
Install Step #16:
OPTIONAL As a option you can cut the factory lower grille bars out as shown.
Install Step #17:
OPTIONAL As a option you can cut the factory lower grille bars out as shown.
Install Step #18:
Place the supplied "U" nuts onto the grille mounting tabs as shown.
Install Step #19:
Fasten the lower grille insert screws from the back side as shown.
Install Step #20:
Reinstall bumper cover to vehicle.
Install Step #21:
In order to use the factory license plate holder. You will need to cut the lower portion as shown in the photo this will allow the plate holder to clear the newly installed grille.
Install Step #22:
Our project Prius shown with GrillCraft Upper & Lower MX Series black mesh grilles.
Install Step #23:
Our project Prius shown with GrillCraft Upper & Lower MX Series silver mesh grilles.
Install Step #24:
Our project Prius shown with GrillCraft Upper & Lower MX Series black mesh grilles.
Install Step #25:
Our project Prius shown with GrillCraft Upper & Lower MX Series silver mesh grilles.
Install Step #26:
Our project Prius shown with GrillCraft Upper & Lower MX Series black mesh grilles.
Install Step #27:
Our project Prius shown with GrillCraft Upper & Lower MX Series silver mesh grilles.
Install Step #28:
Our project Prius shown with GrillCraft Upper & Lower MX Series silver mesh grilles.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2011 Toyota Prius Base N / A
2011 Toyota Prius Base N / A
2010 Toyota Prius Base N / A
2010 Toyota Prius Base N / A