(TOY-1820) Toyota Prius MX Series Upper Grille Installation Details

(TOY-1820) Toyota Prius MX Series Upper Grille

Products : TOY1820B , TOY1820S

Install Step #1:
Our project Toyota Prius in need of a GrillCraft MX-Series upper mesh grille kit.
Install Step #2:
Open the front hood.
Install Step #3:
Remove the plastic clips that secure the plastic under hood trim panel.
Install Step #4:
Remove plastic trim panel.
Install Step #5:
Remove the bolts that secure the top section of the bumper cover to the vehicle.
Install Step #6:
Remove the plastic clips along the top side of the bumper cover.
Install Step #7:
Remove the screw located in the front fender well there is one screw on each side.
Install Step #8:
Remove the plastic clip located in the front fender well there is one on each side.
Install Step #9:
Remove the plastic push clips and bolts located on the front underside of the bumper cover.
Install Step #10:
Pull the top portion of the bumper cover forward in order to unclip from vehicle.
Install Step #11:
Pull the right & left side of the bumper cover in order to unclip cover from vehicle.
Install Step #12:
Now remove bumper cover from vehicle. Make sure when removing cover to unclip lamp plugs.
Install Step #13:
Place the GrillCraft upper grille inserts into the upper grille openings as shown.Inserts fit over the factory grille you may as a option cut out factory grille bars.
Install Step #14:
While holding insert in place mark mounting tab center hole location using a sharp scribe.
Install Step #15:
Using 3/16 drill bit drill holes for the mounting screws.
Install Step #16:
The upper grille mounting hardware.
Install Step #17:
Place screw into grille tab as shown.
Install Step #18:
Attach "Flat" nut to screw tip and fasten screw. DO NOT OVER TIGHTEN!
Install Step #19:
Reinstall bumper cover to vehicle.
Install Step #20:
Our project Prius shown with GrillCraft Upper & Lower MX Series black mesh grilles.
Install Step #21:
Our project Prius shown with GrillCraft Upper & Lower MX Series silver mesh grilles.
Install Step #22:
Our project Prius shown with GrillCraft Upper & Lower MX Series black mesh grilles.
Install Step #23:
Our project Prius shown with GrillCraft Upper & Lower MX Series silver mesh grilles.
Install Step #24:
Our project Prius shown with GrillCraft Upper & Lower MX Series black mesh grilles.
Install Step #25:
Our project Prius shown with GrillCraft Upper & Lower MX Series silver mesh grilles.
Install Step #26:
Our project Prius shown with GrillCraft Upper & Lower MX Series silver mesh grilles.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2011 Toyota Prius Base N / A
2011 Toyota Prius Base N / A
2010 Toyota Prius Base N / A
2010 Toyota Prius Base N / A