(CHE-9402) Chevy Camaro MX Series Lower Grille Installation Details

(CHE-9402) Chevy Camaro MX Series Lower Grille

Products : CHE9402B , CHE9402S

Install Step #1:
Our project 2010-2011 Chevy Camaro SS in need of a custom GrillCraft Grille.
Install Step #2:
Place GrillCraft lower grille into lower bumper opening and hold firmly in place.
Install Step #3:
While holding grille firmly in place mark mounting tab center hole locations using a sharp scribe.
Install Step #4:
Loosen front wheel lug nuts. Next jack up vehicle and place securely on jack stands.
Install Step #5:
Remove front wheels from vehicle as shown.
Install Step #6:
Remove plastic push clips that secure the plastic fender splash shield to the vehicle.
Install Step #7:
Remove the torx screws on the back section of the splash shield.
Install Step #8:
Remove the torx screws on the front section of the splash shield.
Install Step #9:
Now remove splash shield from vehicle as shown.
Install Step #10:
Remove the torx screw located in the vertical position at the edge of the bumper cover.
Install Step #11:
Remove the four bolts shown in photo.
Install Step #12:
Remove the screws on the front lower section of the bumper cover.
Install Step #13:
Remove the bolts located on the top side of the bumper cover.
Install Step #14:
Remove the plastic push clips located on the top side of the bumper cover.
Install Step #15:
Remove the bolts on the top cover panel as shown.
Install Step #16:
Remove top cover panel.
Install Step #17:
Pull the bumper cover from the vehicle just far enough to be able to unplug bumper lamp socket located on the right side of the bumper.
Install Step #18:
Unplug the bumper lamp socket as shown. This plug is located behind the bumper cover on the passanger side of the vehicle.
Install Step #19:
In order to fasten the lower grille screws temporarily remove plastic bumper reinforcement mount from the back side of the bumper cover.
Install Step #20:
Removing plastic bumper reinforcement mount from the back side of the bumper cover.
Install Step #21:
Using a 3/16 drill bit drill mounting screw holes into the factory plastic grille insert.
Install Step #22:
Mount the supplied "U" nuts onto the lower grille mounting tabs as shown.
Install Step #23:
Insert the mounting screws into the mounting tabs.
Install Step #24:
Fasten the lower grille screws.
Install Step #25:
Reinstall plastic reinforcement mount to the bumper cover.
Install Step #26:
Now reinstall bumper cover back onto vehicle make sure to plug the bumper lamp socket before attaching bumper cover to the vehicle.
Install Step #27:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #28:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #29:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #30:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #31:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #32:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #33:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #34:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #35:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #36:
GrillCraft Upper & Lower MX Series silver mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #37:
GrillCraft Upper & Lower MX Series silver mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #38:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #39:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #40:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #41:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #42:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.
Install Step #43:
GrillCraft Upper & Lower MX Series black mesh grilles installed on 2010-2011 Chevy Camaro.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2013 Chevrolet Camaro SS N / A
2013 Chevrolet Camaro SS N / A
2012 Chevrolet Camaro SS N / A
2012 Chevrolet Camaro SS N / A
2011 Chevrolet Camaro SS N / A
2011 Chevrolet Camaro SS N / A
2010 Chevrolet Camaro SS N / A
2010 Chevrolet Camaro SS N / A