(SUB-1732) Subaru Legacy MX Series Lower Grille Installation Details

(SUB-1732) Subaru Legacy MX Series Lower Grille

Products : SUB1732B , SUB1732S

Install Step #1:
Our project 2008-2009 Subaru Legacy in need of a GrillCraft lower custom mesh grille insert kit.
Install Step #2:
Remove plastic fastners along upper grille area using a flat screw driver.
Install Step #3:
Using a flat screwdriver press down on grille shell clips.
Install Step #4:
Remove upper grille from vehicle.
Install Step #5:
Remove plastic fastners located in the front section of the fender well.
Install Step #6:
The removed plastic fastner.
Install Step #7:
Unclip the bumper cover from the fender edge as shown "Simply Pull Forward"
Install Step #8:
Remove the plastic fastners located on the front underside of the bumper cover.
Install Step #9:
Unclip factory fog lamp plugs from the backside of the bumper cover before removing from the vehicle.
Install Step #10:
Remove bumper cover from vehicle.
Install Step #11:
Place GrillCraft lower grille into lower bumper opening.
Install Step #12:
While holding grille firmly in place mark mounting tab hole center locations.
Install Step #13:
Drill for mounting screws using 3/16inch drill bit.
Install Step #14:
Using a marker trace a outline of the backside of the GrillCraft grille insert onto the bumper cover.
Install Step #15:
Mask off the outlined area using masking tape.
Install Step #16:
Spray paint the inner section of the bumper opening using flat black spray paint.
Install Step #17:
A view of the spray painted bumper center section.
Install Step #18:
The supplied "U" Nut fastner.
Install Step #19:
The grille mounting screw.
Install Step #20:
Attach the supplied "U" Nut onto the grille insert mounting tabs.
Install Step #21:
Fasten the grille insert to the bumper cover using the supplied screws. Next install bumper cover back onto vehicle.
Install Step #22:
2008-2009 Subaru Legacy with GrillCraft Mx Series upper & lower mesh grille installed.
Install Step #23:
2008-2009 Subaru Legacy with GrillCraft Mx Series upper & lower mesh grille installed.
Install Step #24:
2008-2009 Subaru Legacy with GrillCraft Mx Series upper & lower mesh grille installed.
Install Step #25:
2008-2009 Subaru Legacy with GrillCraft Mx Series upper & lower mesh grille installed.
Install Step #26:
2008-2009 Subaru Legacy with GrillCraft Mx Series upper & lower mesh grille installed.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2009 Subaru Legacy 2.5i N / A
2009 Subaru Legacy 2.5i N / A
2009 Subaru Legacy 2.5i Limited N / A
2009 Subaru Legacy 2.5i Limited N / A
2009 Subaru Legacy 2.5i Special Edition N / A
2009 Subaru Legacy 2.5i Special Edition N / A
2009 Subaru Legacy 3.0 R N / A
2009 Subaru Legacy 3.0 R N / A
2009 Subaru Legacy 3.0 R Limited N / A
2009 Subaru Legacy 3.0 R Limited N / A
2009 Subaru Legacy GT Limited N / A
2009 Subaru Legacy GT Limited N / A
2009 Subaru Legacy GT spec.B N / A
2009 Subaru Legacy GT spec.B N / A
2008 Subaru Legacy 2.5i N / A
2008 Subaru Legacy 2.5i N / A
2008 Subaru Legacy 2.5i Limited N / A
2008 Subaru Legacy 2.5i Limited N / A
2008 Subaru Legacy 2.5i Special Edition N / A
2008 Subaru Legacy 2.5i Special Edition N / A
2008 Subaru Legacy 3.0 R Limited N / A
2008 Subaru Legacy 3.0 R Limited N / A
2008 Subaru Legacy GT Limited N / A
2008 Subaru Legacy GT Limited N / A
2008 Subaru Legacy GT spec.B N / A
2008 Subaru Legacy GT spec.B N / A