(ROV-2051-SW) Land-Rover Sport SW Series Lower Grille Installation Details

(ROV-2051-SW) Land-Rover Sport SW Series Lower Grille

Products : ROV2051SW

Install Step #1:
Place grille insert into lower bumper opening as shown.
Install Step #2:
While holding inert in place mark the three mounting tabs center hole location.
Install Step #3:
Drill a 1/8 size hole for right & left side mounting screws.
Install Step #4:
Drill 11/64 size hole for the center hole location only.
Install Step #5:
Install plastic rivet into center grille tab. Secure rivet in place with retaining washer as shown.
Install Step #6:
Install supplied screws into right & left grille tabs. Secure screws in place with retaining washer as shown.
Install Step #7:
Insert grille into bumper opening and carefully tighten screws through grille mesh as shown.
Install Step #8:
Alin center rivet with drilled hole and push down to secure rivet in place using a small screw driver.
Install Step #9:
Range Rover Sport with Grillcraft SW-Series Mesh Grilles shown.
Install Step #10:
Range Rover Sport with Grillcraft SW-Series Mesh Grilles shown.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2009 Land Rover Range Rover Sport HSE N / A
2009 Land Rover Range Rover Sport Supercharged N / A
2008 Land Rover Range Rover Sport HSE N / A
2008 Land Rover Range Rover Sport LE N / A
2008 Land Rover Range Rover Sport Supercharged N / A
2007 Land Rover Range Rover Sport HSE N / A
2007 Land Rover Range Rover Sport Supercharged N / A
2006 Land Rover Range Rover Sport HSE N / A
2006 Land Rover Range Rover Sport Supercharged N / A