(HON-1162) Honda S-2000 MX Series Lower Grille Installation Details

(HON-1162) Honda S-2000 MX Series Lower Grille

Products : HON1162B , HON1162S

Install Step #1:
Honda S2000 GrillCraft Mesh Sport Grille kit. Available in silver or black finishes.Part #HON-1162
Install Step #2:
Our project Honda S2000 needing a GrillCraft Custom Mesh Sport grille Kit for added styling and major protection for the a/c condenser unit.
Install Step #3:
Remove the screws located under the right & left splash shield.
Install Step #4:
Pull the splash shield down as shown.
Install Step #5:
Remove the fastners that secure the center lower splash shield.
Install Step #6:
The Grillcraft grille secures into the factory black center grille insert.
Install Step #7:
Insert the GrillCraft Custom S-2000 grille from the front side as shown.
Install Step #8:
While holding grille in place mark the mounting tab center hole.
Install Step #9:
Using a 3/16 drill bit drill for the mounting screws. The screw hole are drilled into the black factory insert not the bumper.
Install Step #10:
Fasten the "U" clip onto mounting tab. Next lets get vent grilles ready.
Install Step #11:
Place vent grilles into opening.
Install Step #12:
Using a scribe mark the vent grille mounting pin location.
Install Step #13:
Using a scribe mark the vent grille upper mounting tab location.
Install Step #14:
Drill 3/16 hole for mounting screw and pin.
Install Step #15:
Note: You may need to clean powder coating off the mounting pin tip in order to fit push on fastner.
Install Step #16:
Fasten the "U" clip onto mounting tab.
Install Step #17:
Note: The mounting pin fastner attaches to the pin but from the back side in the next step.
Install Step #18:
From the under side fasten center grille and vent grilles.
Install Step #19:
Honda S2000 Custom Mesh Grille installation is done!
Install Step #20:
Honda S2000 Custom Mesh Grille.
Install Step #21:
Honda S2000 Custom Mesh Grille.
Install Step #22:
Honda S2000 Custom Mesh Grille.
Install Step #23:
Honda S2000 Custom Mesh Grille.
Install Step #24:
Honda S2000 Custom Mesh Grille.
Install Step #25:
Honda S2000 Custom Mesh Grille.
Install Step #26:
Honda S2000 Custom Mesh Grille.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2009 Honda S2000 Base N / A
2009 Honda S2000 Base N / A
2009 Honda S2000 CR N / A
2009 Honda S2000 CR N / A
2008 Honda S2000 Base N / A
2008 Honda S2000 Base N / A
2007 Honda S2000 Base N / A
2007 Honda S2000 Base N / A
2006 Honda S2000 Base N / A
2006 Honda S2000 Base N / A
2005 Honda S2000 Base N / A
2005 Honda S2000 Base N / A
2004 Honda S2000 Base N / A
2004 Honda S2000 Base N / A