(HUM-2507) Hummer H2 MX / SW Series Lower Grille Installation Details

(HUM-2507) Hummer H2 MX / SW Series Lower Grille

Products : HUM2507B , HUM2507S , HUM2507SW

Install Step #1:
Our project 2008 H2 Hummer in need of GrillCraft Custom mesh grille inserts.
Install Step #2:
Lets start by unlatching the hood straps then opening the hood.
Install Step #3:
Remove the four nuts holding the factory grille shell in place. There are two on each side of the right & left signal lamp.
Install Step #4:
Remove the four nuts holding the factory grille shell in place.
Install Step #5:
Pull forward on the grille shell this will unclip grille from vehicle. Yes its that simple!
Install Step #6:
This is the location of the clips that hold the grille shell to the vehicle.
Install Step #7:
This is the location of the screws that hold grille shell to vehicle.
Install Step #8:
Insert the GrillCraft grille over the lower factory grille as shown.
Install Step #9:
While holding grille in place drill for mounting screws as shown.
Install Step #10:
Fasten grille with supplied hardware.
Install Step #11:
Fasten grille in place. Remount grille shell onto vehicle.
Install Step #12:
2008 Hummer H2 shown here with GrillCraft SW Series Grilles.
Install Step #13:
2008 Hummer H2 shown here with GrillCraft SW Series Grilles.
Install Step #14:
2008 Hummer H2 shown here with GrillCraft SW Series Grilles.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2009 Hummer H2 Base N / A
2009 Hummer H2 Base N / A
2009 Hummer H2 Base N / A
2009 Hummer H2 Base N / A
2009 Hummer H2 Base N / A
2009 Hummer H2 Base N / A
2008 Hummer H2 Base N / A
2008 Hummer H2 Base N / A
2008 Hummer H2 Base N / A
2008 Hummer H2 Base N / A
2008 Hummer H2 Base N / A
2008 Hummer H2 Base N / A