(FOR-5022-BAO) Ford Mustang BG Series Upper Grille Installation Details

(FOR-5022-BAO) Ford Mustang BG Series Upper Grille

Products : FOR5022-BAO

Install Step #1:
Our project Ford Mustang GT waiting for a GrillCraft custom mesh grille.
Install Step #2:
Remove plastic clips on the top panel that covers the grille.
Install Step #3:
Remove plastic clips on the top panel that covers the grille.
Install Step #4:
Removing plastic upper panel.
Install Step #5:
Unclip the driving lamp plug. Its best to unclip the harness if you remove bulb plug make sure not to touch bulb.
Install Step #6:
Remove upper grille by releasing the plastic tabs shown.
Install Step #7:
Remove upper grille shell.
Install Step #8:
The pony emblem must be removed when installing grile type without pony cut out.
Install Step #9:
The pony emblem is attached with metal push clips.
Install Step #10:
Remove clips using flat screw driver and needle nose pliers as shown. Turn push clip to the right & left while pulling up.
Install Step #11:
Remove pony emblem once clips have been removed.
Install Step #12:
Place GrillCraft grille into grille shell opening. The pony emblem base must be shaved down in order for grille to fit flush.
Install Step #13:
The pony emlbem base will be shaved down in order for grille to fit.
Install Step #14:
Using a small angle grinder grind down the plastic around pony emblem.
Install Step #15:
A view of the pony emblem base that has been shaved down.
Install Step #16:
Another view of the pony emblem base that has been shaved down.
Install Step #17:
Place GrillCraft grille into factory grille shell.
Install Step #18:
A view on how flush the grille insert fits into the factory grille shell.
Install Step #19:
The grille mounting hardware.
Install Step #20:
Place screws in from the front side as shown.
Install Step #21:
Fasten the "J" Hook onto the grille plastic and fasten with included washer & locknut.
Install Step #22:
Place right & left outer grilles into the grille shell.
Install Step #23:
Drill 3/16 inch holes for the mounting screws into the grille plastic.
Install Step #24:
Insert screws from the front side as shown.
Install Step #25:
Fasten lock nuts from the backside as shown. Install grille shell onto vehicle.
Install Step #26:
GrillCraft Billet BG Series upper mustang GT grille with-out pony emblem cut out.
Install Step #27:
The fit of the GrillCraft Mustang BG-Series Billet grille is awsome.
Install Step #28:
The fit of the GrillCraft BG-Series Billet custom grille for the Mustang GT is awsome.
Install Step #29:
The fit of the GrillCraft BG-Series Billet custom grille for the Mustang GT is awsome.
Install Step #30:
The fit of the GrillCraft BG-Series Billet custom grille for the Mustang GT is awsome.
Install Step #31:
The fit of the GrillCraft BG-Series Billet custom grille for the Mustang GT is awsome.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2009 Ford Mustang GT Grille retains factory fog lamps.
2008 Ford Mustang GT Grille retains factory fog lamps.
2007 Ford Mustang GT Grille retains factory fog lamps.
2006 Ford Mustang GT Grille retains factory fog lamps.
2005 Ford Mustang GT Grille retains factory fog lamps.