(DOD-3053) Dodge Magnum MX / SW Series Lower Grille Installation Details

(DOD-3053) Dodge Magnum MX / SW Series Lower Grille

Products : DOD3053B , DOD3053S , DOD3053SW

Install Step #1:
Remove the plastic clips that hold the top of the bumper cover to vehicle using a flat screwdriver works fine.
Install Step #2:
Removing the plastic clips.
Install Step #3:
Remove the right & leftn plastic trim panels along top of the bumper cover.
Install Step #4:
Remove the three plastic rivets on the front section of the wheel well. The plastic rivets must be discarded the grille kits hardware includes replacement clips.
Install Step #5:
The factory plastic rivets are not re-usable they will be replaced with supplied clips.
Install Step #6:
Removing the plastic rivet is a little tough so its best to cut them off using a set of wire cutters works fine.
Install Step #7:
These are the replacement clips included with the grille hardware.
Install Step #8:
Remove bolt securing bumper cover to fender edge.
Install Step #9:
Remove bolts located along the front underside of the bumper cover.
Install Step #10:
Removing the underside bolts.
Install Step #11:
Removing the bumper cover from the vehicle is a simple process.
Install Step #12:
Insert the GrillCraft grille from the front side as shown.
Install Step #13:
Mark grille insert mounting tab center hole locations using a sharp scribe.
Install Step #14:
Drill 3/16 inch holes for the grille mounting screws.
Install Step #15:
The grille insert mounting hardware.
Install Step #16:
Attach the supplied flat nuts as shown.
Install Step #17:
Fasten grille insert from the back side as shown.
Install Step #18:
2008 Dodge Magnum shown here with GrillCraft MX Series upper and lower custom Black mesh grille kit.
Install Step #19:
2008 Dodge Magnum shown here with GrillCraft MX Series upper and lower custom Black mesh grille kit.
Install Step #20:
2008 Dodge Magnum shown here with GrillCraft MX Series upper and lower custom Black mesh grille kit.
Install Step #21:
2008 Dodge Magnum shown here with GrillCraft MX Series upper and lower custom Silver mesh grille kit.
Install Step #22:
2008 Dodge Magnum shown here with GrillCraft MX Series upper and lower custom Silver mesh grille kit.
Install Step #23:
2008 Dodge Magnum shown here with GrillCraft MX Series upper and lower custom Silver mesh grille kit.
Install Step #24:
2008 Dodge Magnum shown here with GrillCraft MX Series upper and lower custom Silver mesh grille kit.
Install Step #25:
2008 Dodge Magnum shown here with GrillCraft MX Series upper and lower custom Silver mesh grille kit.
Install Step #26:
2008 Dodge Magnum shown here with GrillCraft MX Series upper and lower custom Silver mesh grille kit.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2008 Dodge Magnum R/T N / A
2008 Dodge Magnum R/T N / A
2008 Dodge Magnum R/T N / A
2008 Dodge Magnum SE N / A
2008 Dodge Magnum SE N / A
2008 Dodge Magnum SE N / A
2008 Dodge Magnum SXT N / A
2008 Dodge Magnum SXT N / A
2008 Dodge Magnum SXT N / A