(TOY-1853) Scion XB MX Series Lower Grille Installation Details

(TOY-1853) Scion XB MX Series Lower Grille

Products : TOY1853B , TOY1853S

Install Step #1:
Here is our project 2008 Scion XB in need of a GrillCraft Custom MX-Series mesh grille.
Install Step #2:
Remove the plastic push clips shown.
Install Step #3:
Remove plastic trim panel.
Install Step #4:
Remove upper grille center bolt.
Install Step #5:
Remove upper grille shell from vehicle.
Install Step #6:
Remove the bolts located on the right & left top portion of the bumper cover.
Install Step #7:
Remove the push clips located on the right & left top section of the bumper cover.
Install Step #8:
Remove bolts located in the right & left fender well.
Install Step #9:
Remove push clips located in the right & left section of the fender well.
Install Step #10:
Remove bolts located on the front under side of the bumper cover.
Install Step #11:
Here is a view of the bolts removed from the underside.
Install Step #12:
Pull on the right & left front section of the bumper cover as shown. The bumper will unclip from the vehicle.
Install Step #13:
Remove bumper cover from vehicle.
Install Step #14:
Remove bumper cover from vehicle.
Install Step #15:
Insert GrillCraft grille into lower bumper opening and mark mounting tab location as shown.
Install Step #16:
Remove lower factory grille from bumper.
Install Step #17:
Cut a notch out of the factory grille insert for the GrillCraft grille tab as shown.
Install Step #18:
Drill 3/16" holes for grille mounting screws.
Install Step #19:
The lower grille mounting hardware. It is best to paint mounting hardware with flat black spray paint when installing a black grille.
Install Step #20:
Fasten grille screws from back side.
Install Step #21:
Insert the side vent grille into vent opening and mark mounting pin locations.
Install Step #22:
Drill holes for vent grille mounting pins.
Install Step #23:
The vent grille mounting fastner.
Install Step #24:
Place rubber washer and metal fastner onto mounting pin from the back side of bumper.
Install Step #25:
Push down on metal fastner using a small nut driver.
Install Step #26:
A view of the fastner installed.
Install Step #27:
The GrillCraft vent grilles fit like a glove!
Install Step #28:
2008 Scion XB shown with GrillCraft MX Series upper & lower mesh grille.
Install Step #29:
2008 Scion XB shown with GrillCraft MX Series upper & lower mesh grille.
Install Step #30:
2008 Scion XB shown with GrillCraft MX Series upper & lower mesh grille.
Install Step #31:
2008 Scion XB shown with GrillCraft MX Series upper & lower mesh grille.
Install Step #32:
2008 Scion XB shown with GrillCraft MX Series upper & lower mesh grille.
Install Step #33:
2008 Scion XB shown with GrillCraft MX Series upper & lower mesh grille.
Install Step #34:
2008 Scion XB shown with GrillCraft MX Series upper & lower mesh grille.
Install Step #35:
2008 Scion XB shown with GrillCraft MX Series upper & lower mesh grille.
Install Step #36:
2008 Scion XB shown with GrillCraft MX Series upper & lower mesh grille.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2010 Scion xB Base N / A
2010 Scion xB Base N / A
2009 Scion xB Base N / A
2009 Scion xB Base N / A
2008 Scion xB Base N / A
2008 Scion xB Base N / A