(MIT-3314) Mitsubishi Eclipse MX Series Lower Grille Installation Details

(MIT-3314) Mitsubishi Eclipse MX Series Lower Grille

Products : MIT3314B , MIT3314S

Install Step #1:
Here is our 06-07 Mitsubishi Eclipse Lower Mesh Grille Kit Part# Mit-3314 available in silver or black powder coat finish.
Install Step #2:
Our Project Mitsubishi Eclipse in need of a GrillCraft lower mesh grille kit.
Install Step #3:
Our Project Mitsubishi Eclipse in need of a GrillCraft lower mesh grille kit.
Install Step #4:
Remove the plastic clips along the top of the bumper cover.
Install Step #5:
Removing plastic push clips.
Install Step #6:
Remove the two bolts located on the right & left side of the headlamps.
Install Step #7:
Remove bumper cover from vehicle.
Install Step #8:
Remove the plastic clips located on the front section of the fender well area using a philips screw driver.
Install Step #9:
These are the clips removed from the front section of the fender well splash shield.
Install Step #10:
Remove the bolts that secure the bumper cover to the fender these two bolts are in the vertical position located on the right & left sides. Also remove all the clips and screws located on the front under side of the bumper cover these also are in the vertical position.
Install Step #11:
With the bolts removed the bumper cover will seperate from the fender as shown.
Install Step #12:
Unplug the fog lamp bulb socket as shown.
Install Step #13:
Insert the Grillcraft grille from the front side as shown while holding in place mark the mounting tab center hole locations using a sharp scribe.
Install Step #14:
drill mounting screw holes using 3/16 drill bit.
Install Step #15:
Attach the supplied grille hardware as shown.
Install Step #16:
Fasten grille in place.
Install Step #17:
Our project Mitsubishi Eclipse with GrillCraft custom Mx Series mesh grille installed in black powder coated finish.
Install Step #18:
Our project Mitsubishi Eclipse with GrillCraft custom Mx Series mesh grille installed in black powder coated finish.
Install Step #19:
Our project Mitsubishi Eclipse with GrillCraft custom Mx Series mesh grille installed in black powder coated finish.
Install Step #20:
Our project Mitsubishi Eclipse with GrillCraft custom Mx Series mesh grille installed in black powder coated finish.
Install Step #21:
Our project Mitsubishi Eclipse with GrillCraft custom Mx Series mesh grille installed in black powder coated finish.
Install Step #22:
Our project Mitsubishi Eclipse with GrillCraft custom Mx Series mesh grille installed in black powder coated finish.
Install Step #23:
Our project Mitsubishi Eclipse with GrillCraft custom Mx Series mesh grille installed in black powder coated finish.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2008 Mitsubishi Eclipse GS N / A
2008 Mitsubishi Eclipse GS N / A
2008 Mitsubishi Eclipse GT N / A
2008 Mitsubishi Eclipse GT N / A
2008 Mitsubishi Eclipse SE N / A
2008 Mitsubishi Eclipse SE N / A
2008 Mitsubishi Eclipse Spyder GS N / A
2008 Mitsubishi Eclipse Spyder GS N / A
2008 Mitsubishi Eclipse Spyder GT N / A
2008 Mitsubishi Eclipse Spyder GT N / A
2007 Mitsubishi Eclipse GS N / A
2007 Mitsubishi Eclipse GS N / A
2007 Mitsubishi Eclipse GT N / A
2007 Mitsubishi Eclipse GT N / A
2007 Mitsubishi Eclipse Spyder GS N / A
2007 Mitsubishi Eclipse Spyder GS N / A
2007 Mitsubishi Eclipse Spyder GT N / A
2007 Mitsubishi Eclipse Spyder GT N / A
2006 Mitsubishi Eclipse GS N / A
2006 Mitsubishi Eclipse GS N / A
2006 Mitsubishi Eclipse GT N / A
2006 Mitsubishi Eclipse GT N / A