(FOR-5017) Ford Cobra MX Series Upper Grille Installation Details

(FOR-5017) Ford Cobra MX Series Upper Grille

Products : FOR5017B , FOR5017S

Install Step #1:
GrillCraft Ford Cobra MX-Series Upper Grille Kit Part# FOR-5017 Available in silver or black powder coat finishes.
Install Step #2:
A close view of the GrillCraft Ford Cobra MX-Series Upper Grille Kit Part# FOR-5017 Available in silver or black powder coat finishes. The quality is unbelievable!!!
Install Step #3:
Our project Ford Cobra in need of a Grillcraft Grille. The GrillCraft grille will give the Cobra styling along with radiator protection.
Install Step #4:
Place the upper grille insert in place as shown.
Install Step #5:
Here is a guide in regards to the center grille screw locations. The center grille bracket hole should be drilled approximately (2 7/8 inch) from the bumper edge as shown.
Install Step #6:
Here is a guide in regards to the right & left grille screw locations. The rt/lft grille bracket holes should be drilled approximately (1 1/4 inch) from the bumper edge as shown.
Install Step #7:
You may want to mark the grille location using a piece of tape before drilling as shown.
Install Step #8:
A view of the upper grille setting location. Make sure that when shutting the hood the grille will clear the underside of the hood.
Install Step #9:
Remove the plastic clips on the top corner of the bumper cover.
Install Step #10:
Drill center & side holes using 3/16 drill bit.
Install Step #11:
A view of the hardware that will keep the grille in place.
Install Step #12:
Insert the center screw and then install (flat nut) on the under side of the bumper cover plastic as shown.
Install Step #13:
Fasten the grille screws.
Install Step #14:
Our Ford Cobra shown here with optional lower grille kit installed. The Cobra emblem can either be left in the stock position or attached to the front side of the grille.
Install Step #15:
Our Ford Cobra shown here with optional lower grille kit installed.
Install Step #16:
Our Ford Cobra shown here with optional lower grille kit installed.
Install Step #17:
Our Ford Cobra shown here with optional lower grille kit installed.
Install Step #18:
Our Ford Cobra shown here with optional lower grille kit installed.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2004 Ford Mustang SVT Cobra N / A
2004 Ford Mustang SVT Cobra N / A
2003 Ford Mustang SVT Cobra N / A
2003 Ford Mustang SVT Cobra N / A
2003 Ford Mustang SVT Cobra 10th Anniversary N / A
2003 Ford Mustang SVT Cobra 10th Anniversary N / A