(HUM-2501) Hummer H2 MX / SW Series Lower Grille Installation Details

(HUM-2501) Hummer H2 MX / SW Series Lower Grille

Products : HUM2501B , HUM2501S

Install Step #1:
Here is our MX-Series Hummer H2 lower Grille kit Part# HUM-2501 available in chrome plated finish or black, silver powder coat finish.
Install Step #2:
Here is our project H2 Hummer in need of a lower mesh grille.
Install Step #3:
First remove the lower plastic grille panel simply pull forward on the panel and the clips will un fasten. Then place the sport grille in place as shown.
Install Step #4:
With grille in place mark mounting tab center hole location.
Install Step #5:
Using a 3/16 drill bit drill for the mounting screws.
Install Step #6:
Insert the supplied screw from the backside.
Install Step #7:
From the front side insert the supplied flat nut using a pair of needle nose pliers (its a bit tight so have some patients.
Install Step #8:
Install the lower panel back onto the vehicle.
Install Step #9:
Fits like a glove!!
Install Step #10:
Looking good!
Install Step #11:
Looks great with the matching upper grille.

These installations steps pertain to the following vehicles:


Year Make Model Submodel Fitment Notes
2007 Hummer H2 Base N / A
2007 Hummer H2 Base N / A
2007 Hummer H2 Base N / A
2007 Hummer H2 Base N / A
2006 Hummer H2 Base N / A
2006 Hummer H2 Base N / A
2006 Hummer H2 Base N / A
2006 Hummer H2 Base N / A
2005 Hummer H2 Base N / A
2005 Hummer H2 Base N / A
2005 Hummer H2 Base N / A
2005 Hummer H2 Base N / A
2004 Hummer H2 Base N / A
2004 Hummer H2 Base N / A
2003 Hummer H2 Base N / A
2003 Hummer H2 Base N / A