|
|||||||||
 Picture #1: Here is the GrillCraft custom mesh grille kit for the factory hood scoop. Part# SUB-1715 available in black & silver powder coated finish. |
 Picture #2: Remove the trim cover located under the hood scoop. |
||||||||
 Picture #3: Remove the bolts that secure the bottom portion of the scoop. |
 Picture #4: Removing the under side portionb of the hood scoop. |
||||||||
 Picture #5: Remove the bolts that secure the hood scoop to the hood. |
 Picture #6: Remove the top of the hood scoop. |
||||||||
 Picture #7: Using a file notch a small section in the hood scoop center divider as shown. (this notch will let the scoop grille lay flush) |
 Picture #8: Note: The small notch created with the file. |
||||||||
 Picture #9: Place the grille into the scoop and drill a 3/16 hole for the mounting screw (make sure hole lines up with the mounting tab) |
 Picture #10: The supplied mounting hardware. |
||||||||
 Picture #11: Now that looks awsome!!!!!!!! |
 Picture #12: No more damage to the intercooler!!!!!!!!!!!!!!! |
||||||||
