|
|||||||||
 Picture #1: Here is the GrillCraft Titan / Armada upper mesh grille kit Part# NIS-1550 available in black or silver powder coated finishes. |
 Picture #2: Our project Titan in need of a GrillCraft custom mesh grille. |
||||||||
 Picture #3: Using a screw driver unfasten the upper grille clips. |
 Picture #4: Using a screw driver unfasten the grille clips located on the bottom section of the upper grille. |
||||||||
 Picture #5: Removing the grille shell. |
 Picture #6: (OPTIONAL) The center section of the grille is cut out.(OPTIONAL) |
||||||||
 Picture #7: (OPTIONAL) Removing the center grid section(OPTIONAL) |
 Picture #8: (OPTIONAL)Using a grinder to clean up the edges.(OPTIONAL) |
||||||||
 Picture #9: Install the GrillCraft Grille center section from the front side as shown. |
 Picture #10: From the back side using a scribe mark mounting tab center holes. |
||||||||
 Picture #11: Using 3/16 drill bit drill for the mounting screws. |
 Picture #12: Fasten the grille as shown with the supplied hardware. |
||||||||
 Picture #13: Next remove the plastic cover plates located on the back side of the outer grille section openings. |
 Picture #14: Insert side grilles and mark location of mounting tab center hole and drill using 3/16 drill bit then fasten with hardware. |
||||||||
 Picture #15: Our Titan ready for action with the GrillCraft Custom Grille. (shown here with optional lower grille installed) |
 Picture #16: Looking good with a GrillCraft grille. |
||||||||
 Picture #17: GrillCraft mesh grille fits like a glove. |
 Picture #18: The Titan / Armada takes on a clean look with the custom grille installed. |
||||||||
