|
||||||||||
 Picture #1: Here is our Hummer H3 (7pcs) SW-Series upper grille kit Part# Hum-2503-SW also available in silver & black powder coated finishes in our MX-Series Grille. |
 Picture #2: Our project H3 Hummer in need of a GrillCraft SW Series grille kit. |
|||||||||
 Picture #3: The first step will be to remove the nuts that hold the grille shell onto the vehicle. |
 Picture #4: There are two nuts located on the back side of the grille shell access them through the grille opening. |
|||||||||
 Picture #5: Remove the grille shell from the vehicle. |
 Picture #6: The two nuts removed in step#4 will no longer be installed with the new grilles in place access is not possible. |
|||||||||
 Picture #7: Remove the bolts that secure the header panel to the vehicle as shown. |
 Picture #8: Remove the bolts that secure the header panel to the vehicle as shown. |
|||||||||
 Picture #9: Removing header panel from the vehicle. |
 Picture #10: Here is the GrillCraft hood latch extension rod. With the new grilles in place it will be necessary to modify the hood latch with this item. |
|||||||||
 Picture #11: Remove hood latch from vehicle and measure 1 1/8 inch from the top of the hook as shown. |
 Picture #12: Drill a 3/16" hole into hood latch as shown. |
|||||||||
 Picture #13: Here is the hood latch with the hole drilled in it. |
 Picture #14: Place the supplied allen bolt into drilled hole as shown. |
|||||||||
 Picture #15: Install the extension lever and fasten in place. |
 Picture #16: Here is the latch with the extension rod in place. |
|||||||||
 Picture #17: Here is a view of how the new extension rod works. |
 Picture #18: Here is another view of how the new extension rod works. |
|||||||||
 Picture #19: Lets place the grille inserts into the grille shell opening. |
 Picture #20: While holding grille insert in place mark mounting tab center hole location. |
|||||||||
 Picture #21: Drill 3/16" hole for the mounting screws. |
 Picture #22: The grille insert mounting hardware. |
|||||||||
 Picture #23: Fasten the grille inserts into place. |
 Picture #24: Hummer H3 shown here with GrillCraft SW-Series Custom Upper & Lower Grille kit installed. |
|||||||||
 Picture #25: Hummer H3 shown here with GrillCraft SW-Series Custom Upper & Lower Grille kit installed. |
 Picture #26: Hummer H3 shown here with GrillCraft SW-Series Custom Upper & Lower Grille kit installed. |
|||||||||
 Picture #27: Hummer H3 shown here with GrillCraft SW-Series Custom Upper & Lower Grille kit installed. |
||||||||||
