Ford Super/Duty FX4 '08-10 Upper Grille 3pc (FOR-1359)
|
| Part # FOR-1359B |
| Part # FOR-1359S |
|
|
|
Picture #1:
Our 2008-2010 Project Ford SuperDuty in need of a GrillCraft MX-Series Mesh Grille.
|
Picture #2:
Using a screwdriver remove the factory plastic screw clips securing the grille shell. These clips are located along the top portion of the center grille and side vent openings.
|
Picture #3:
Remove the two bolts located on the back side corner of the grille shell.
|
Picture #4:
Place plastic pry bar under grille shell in order to release grille shell clip.
|
Picture #5:
Now remove grille shell from vehicle.
|
Picture #6:
The grille shell center section must be cut out. Cutting the two outer vent opening is optional.
|
Picture #7:
Using a saw cut the center section grille bars out.
|
Picture #8:
Removing grille center bars.
|
Picture #9:
Grind the cut area flush using a grinder.
|
Picture #10:
A look the cut area after grinding.
|
Picture #11:
OPTIONAL: Cutting the side vent grille openings.
|
Picture #12:
A view of the cut out grille shell vent openings.
|
Picture #13:
We decided to paint our grille shell backing portion.
|
Picture #14:
Use "Flat Black" spray paint when painting the grille shell backing.
|
Picture #15:
Place grille shell vents into the grille shell. The mounting tabs are to be positioned on the top inner. Mark mounting tab center hole locations.
|
Picture #16:
Drill 3/16 inch holes for the mounting screws.
|
Picture #17:
Place center grille into grille shell opening. While holding grille insert firmly in place mark mounting tab center hole locations.
|
Picture #18:
Drill holes for the mounting screws using a 3/16 inch drill bit.
|
Picture #19:
Remove the grille shell reinforcement temporarily in order to get access to the new grille screw holes.
|
Picture #20:
Removing grille shell reinforcement.
|
Picture #21:
The grille mounting screw and "Flat" nuts.
|
Picture #22:
Place the screw and "flat" nut into the drilled holes.
|
Picture #23:
Fasten grille insert screws.
|
Picture #24:
Reinstall grille shell reinforcement.
|
Picture #25:
The grille shell is ready to be install back onto vehicle.
|
Picture #26:
We recommend painting the are behind the grille with "Flat Black" spray paint.
|
Picture #27:
A view of the radiator and cooler painted flat black.
|
Picture #28:
Install grille shell onto vehicle.
|
Picture #29:
Use the factory grille shell fastners and bolts.
|
Picture #30:
Insert factory grille fastners from the underside as shown.
|
Picture #31:
Ford SuperDuty 2008-2010 GrillCraft Black MX Series mesh grille Grille installed.
|
Picture #32:
Ford SuperDuty 2008-2010 GrillCraft Black MX Series mesh grille Grille installed.
|
Picture #33:
Ford SuperDuty 2008-2010 GrillCraft Black MX Series mesh grille Grille installed.
|
Picture #34:
Ford SuperDuty 2008-2010 GrillCraft Black MX Series mesh grille Grille installed.
|
Picture #35:
Ford SuperDuty 2008-2010 GrillCraft Black MX Series mesh grille Grille installed.
|
Picture #36:
Ford SuperDuty 2008-2010 GrillCraft Black MX Series mesh grille Grille installed.
|
Picture #37:
Ford SuperDuty 2008-2010 GrillCraft Black MX Series mesh grille Grille installed.
|
Picture #38:
Ford SuperDuty 2008-2010 GrillCraft Silver MX Series mesh grille Grille installed.
|
Picture #39:
Ford SuperDuty 2008-2010 GrillCraft Black MX Series mesh grille Grille installed.
|
Picture #40:
Ford SuperDuty 2008-2010 GrillCraft Black MX Series mesh grille Grille installed.
|
Picture #41:
Ford SuperDuty 2008-2010 GrillCraft Black MX Series mesh grille Grille installed.
|
