Honda S-2000 '00-03 Lower Grille Kit (HON-1160)
|
| Part # HON-1160B |
| Part # HON-1160S |
|
|
|
Picture #1:
Honda 00-03 S2000 GrillCraft Sport Grille kit available in silver or black powder coat finish.
|
Picture #2:
Our project Honda S2000 needing a GrillCraft Sport grille Kit for added styling and major protection for the a/c condenser unit.
|
Picture #3:
Without the GrillCraft Grille the A/C Condenser can be easily damaged from any road debris (Note: the condenser in plain view)
|
Picture #4:
Remove the screws located under the right & left splash shield.
|
Picture #5:
Place grille into bumper opening as shown.
|
Picture #6:
Using a sharp scribe mark the mounting tab center holes make sure to firmly press grille into opening while marking the holes for the best fit. (A coat hanger wire works great as a scribe just sharpen the point)
|
Picture #7:
Using a 3/16 drill bit drill the three mounting screw holes.
|
Picture #8:
Attach supplied "U" Nut fasteners to grille tabs as shown and fasten grille from the back side using supplied screws.
|
Picture #9:
In order to install side vent grilles place grille into vent opening and scribe mark the mounting pin location.
|
Picture #10:
Drill a 1/8-inch hole for mounting pins.
|
Picture #11:
Now place vent grille pin into drilled hole.
|
Picture #12:
Attach vent grille with supplied press-on clips from the backside (using a nut driver to press the clip on works great)
|
Picture #13:
(Option) The side vent backing can be cut out if desired for air flow just make sure to leave room for the mounting pins.
|
Picture #14:
Wow what a difference!
|
Picture #15:
Great styling with added protection.
|
