Special offer for online orders only! FREE SHIPPING, no minimum purchase. Hurry! Don't wait, this offer is about to expire! Click for restrictions.
View Cart

home about us dealers downloads links faqs installs gallery news contact

Select Make:
· Acura
· BMW
· Cadillac
· Chevrolet
· Chrysler
· Dodge
· Ford
· GMC
· Honda
· Hummer
· Jeep
· Land Rover
· Lincoln
· Mini Cooper
· Mitsubishi
· Nissan
· Scion
· Subaru
· Toyota
· Volkswagen
· Volvo

Accessories

Wanted Vehicles ~ Click Here!



Grille Installation Process Printable Version
        Honda Accord '06-07 4-Door Upper Grille Kit (HON-1140)
Part # HON-1140S
Part # HON-1140B

Picture #1:
Our project Honda Accord in need of a GrillCraft upper mesh grille kit.

Picture #2:
Remove the plastic clips that secure the plastic under hood trim panel.

Picture #3:
Use a flat screw driver in order to remove clip.

Picture #4:
Remove plastic trim panel.

Picture #5:
Remove the plastic push clips located on the front under side of the front bumper cover.

Picture #6:
This is the location of the fender well screws.

Picture #7:
Remove the two screws located in the front fender well there is one screw on each side.

Picture #8:
Remove bumper cover from the vehicle.

Picture #9:
Remove the factory grille clips.

Picture #10:
Remove the factory grille from the bumper cover.

Picture #11:
Place the Ggrillcraft grille insert into the upper grille opening and mark the center pin location.

Picture #12:
Drill 3/16 hole for the igrille center pin.

Picture #13:
Now mark the right & left mounting tab center hole locations.

Picture #14:
Drill 3/16 inch hole for grille mounting screws.

Picture #15:
OPTIONAL: We recommend painting the area behind the grille with flat black spray paint.

Picture #16:
OPTIONAL: We recommend painting the area behind the grille with flat black spray paint.

Picture #17:
OPTIONAL: We recommend painting the area behind the grille with flat black spray paint.

Picture #18:
Mount the grille insert to the bumper cover and fasten with supplied hardware.

Picture #19:
Reinstall the bumper cover to the vehicle then line up the center bracket under the plastic cover.

Picture #20:
Drill 3/16 inch hole in the plastic trim panel for the center tab.

Picture #21:
Install center screw with the supplied flat nut.

Picture #22:
Here is the grille installed on the vehicle.

Picture #23:
The GrillCraft MX Series custom mesh grille on the 2006-2007 Accord looks awsome shown here with the lower 3pc kit !!!!!

Picture #24:
The GrillCraft MX Series custom mesh grille on the 2006-2007 Accord looks awsome shown here with the lower 3pc kit !!!!!

Picture #25:
The GrillCraft MX Series custom mesh grille on the 2006-2007 Accord looks awsome shown here with the lower 3pc kit !!!!!

Picture #26:
The GrillCraft MX Series custom mesh grille on the 2006-2007 Accord looks awsome shown here with the lower 3pc kit !!!!!



© 2010 Grillcraft Custom Products

Powered by: automotive.NET (an iD3 Product)

Grillcraft® - Genuine Sport Grilles